All build threads go here.
Post Reply
Posts: 1
Joined: Sat Feb 19, 2011 12:03 pm


Post by alhansen »

My AirCam is almost ready for 1st flight but I need an ME rating. Anyone have a suggestion on how at least part of that training might be done in an AirCam?
Al Hansen
Quincy, CA
Posts: 1
Joined: Tue Mar 22, 2011 11:29 pm

Re: Training

Post by 6tn1 »

You can try Richard Johnson. He's in Winter Haven,FL. Lockwood should have his contact info otherwise PM me.

Posts: 18
Joined: Tue May 06, 2014 11:08 pm
Location: Las Vegas

Re: Training and Building

Post by rrclv »

I am in the final stages of purchasing a kit but this website and a web search has not provided much information about the progress of others. I would greatly appreciate the comments of others regarding plans, issues and "gotcha's." Many Thanks
Las Vegas, NV
Posts: 8
Joined: Mon Nov 07, 2011 12:59 pm
Location: thunder bay

Re: Training and building

Post by mosky »

Fear not.
I was in the same position last year before I pulled the trigger on the kit purchase. Having never built an airplane before and not knowing what to expect I was very pleasantly surprised by the quality and completeness of the kit. The instructions are very well laid out, detailed and easy to follow with very clear illustrations for every step. If you ever run into a problem or question you can get it answered from the factory very quickly. As for information online there is not a lot but there are a couple of builders out there that were posting their progress. A couple out there include: and

Although both do not show the completion of an Aircam they do give you an idea of what to expect. I have been photographing my progress and will someday set something up online but right now the building is the priority....
larry fish
Posts: 7
Joined: Sun Jan 30, 2011 3:52 am

Re: Training

Post by larry fish »

pictures are good, but they do not always give all the answers. get some email address from lockwood of builders that have built or are building. i did build my air cam and would be happy to help if i can.
Post Reply