• AirCam Forum
    Meet other AirCam owners & enthusiasts!
It is currently Sat Dec 04, 2021 3:36 am

oil change

All build threads go here.

by dkwall » Mon Nov 06, 2017 9:24 pm

I have 45 hours on my engines. I changed the oil and filter this weekend. Two engines, two oil changes. It took longer than I thought it would. I took the oil tanks off the engines and then drained the oil. The filter had more oil in it than i had been led to believe based on the rotax video guide. Next oil change I will put a little bowel under the filter.
I also removed, cleaned and gapped the plugs.
The engines are running good.
There was a SB out concerning the push rods. I inspected my rods and everything was OK.
Posts: 19
Joined: Mon Dec 21, 2015 10:51 pm
Location: jennings

Return to Builder's Forum


User Menu